Water damage can happen anywhere, but the bathroom is one of the worst places to have it occur because your ceiling will be damaged too. A lot of people don’t know how to fix this problem. But, this blog will answer all your questions about how to fix a water damaged ceiling.
Step 1: Prevent the source of water
The first thing you have to do is, find the source from which the water is penetrating and stop it immediately. Find and seal or fix the leaky roof. Proceed with further steps.
Step 2: Get rid of moisture in the ceiling
Once the leaky roof is sealed or fixed, dry the ceiling with dryers or fans. It is important to dry both areas below and above the ceiling. This way, you can remove moisture.
Step 3: Take off the damaged parts
Fix water-damaged ceiling areas with a loose or bulgy appearance. Scrape it out using the knife or paint scraper. Don’t take out the surface area of the ceiling if it is smooth & flat.
Step 4: Plaster or repair the ceiling
Smooth the ridges between the affected and clean areas using sandpaper. If your ceiling surface has big holes in it, then plastering or repairing is the best option.
Step 5: Apply primer over the paint
Primer before painting is an important factor. If your ceiling surface has any stains over it, then apply primer over them. Allow it to dry, then go for the coat of paint.
Fix water damaged ceiling yourself by following the above home tips and getting the original look of your roof back.
Final Thoughts
It is necessary to immediately repair the water-damaged ceiling as it can lead to a bigger mess that will require a high cost to fix. With the help of steps enlisted in the blog, you can fix your damaged ceiling. But, if these steps didn’t work or you are not sure about it, taking the help of professional services is always a good choice.
If you want to repair a larger roof area, you can hire TNT Carpet Care. Over the years, we are a top-rated and most trusted company for water damage repair in El Cajon.
