Do You Keep Cleaning Carpet Until Water Is Clear?

If you want your home to look good, it’s important that you know how to clean your carpet. Carpets are an important investment in any home, so they must keep looking fresh and new. 

It is natural that the cleaning water of your carpet is black when you wash the carpet. It’s the dirt that comes out. However, if the water in the carpet cleaner is still black after several passes with the cleaner, this is a sign that something is wrong.

So how do you keep cleaning carpet until water is clear?

Here Are Five Common Reasons Your Carpet Cleaner Water Turns Black

Don’t Hurry And Get Rid Of All The Dirt

You can’t rush at the time of cleaning carpet. The machine should run slowly and cover the carpet completely. Before clipping and emptying, the shampoo solution should have time to distribute properly on the carpet. The smaller and cheaper your carpet cleaner, the longer it will take. 

You have to shampoo and rinse the carpet several times before the water clears.

Missing The Spots

Dont Miss The Spots At The Time Of Cleaning

When cleaning, you are missing parts of the carpet. If you do not use the carpet cleaner slowly and methodically, it is easy to skip parts of the carpet with each run.

Instead of cleaning in straight lines, use the diagonal pattern. Slowly sweep the cleaner along the diagonal lines along a three-foot-wide imaginary track before moving to the next track. Clean the entire carpet. Rinse and repeat.

Leaving Too Much Foam

Don't Leave Too Much Foam

If you mix your carpet cleaning solution too strong, you will create a lot of foam. If you move your carpet cleaner too fast, you won’t pull enough foam.

It is a foam that removes dirt from the carpet. Dirt particles follow it, and it pollutes your water when absorbed. If your carpet cleaner is very foamy or you leave foam on the carpet, we will find more dirt on it. 

Make sure you use the solution in concentrated quantities recommended by carpet cleaner manufacturers. 

Dirt Is Deep Inside 

Your carpet can be filthy. Even if it looks clean, a carpet is usually full of dirt and small particles of clay that hide in its piles. When you clean the carpet, it is the dirt that comes out of this deep bed. 

It may take several passes of carpet cleaner to remove all the dirt. Do you keep cleaning the carpet until the water is clear? Yes, only when the water is clean, can you be sure that your carpet is thoroughly cleaned. To reduce this dirt, never walk on carpets with shoes you have worn on the street and clean with a vacuum cleaner at least once a week.

It Can Be Mold 

Your carpet can have molded into the bottom. This can be caused by wetting or leaving the mat too damp while shampooing. 

If this is the case, you need professional help to clean the carpet. Take a quick decision before the mold spreads to other parts of your home and start creating health problems.

If you appreciate your free time and want a clean carpet, contact trustable and reliable carpet cleaning in La Mesa like TNT Carpet Care. We have the tools and experience to clean your carpets with guaranteed results in our deep cleaning service. Call 619-208-2708 to book your appointment now.