Mold Prevention And Control Tips By TNT Carpet Care

Mold Prevention and control tips

Jul 4, 2023 | Mold Removal

Mold is a typical common thing to notice in our homes. But avoiding it can lead to serious health issues such as allergens or sickness. Therefore, it is necessary to eliminate them as soon as possible.

In this blog, our mold remediation experts at TNT Carpet Care have shared some helpful tips to prevent and control mold in your home. By utilizing these methods correctly, you can protect your family and belongings from harmful mold and mildew.

6 Expert Tips for Mold Prevention & Control

1. Quickly Dry The Wet Areas

Moisture is the prime reason behind the growth of mold itself. Therefore, it is necessary to tackle wet areas soon as possible. If you have experienced heavy rainfall or flood, immediately dry the carpet, bedding, furniture, ceiling, walls, and other wet areas.

There are some more things to pay attention to. Don’t leave wet clothes in the washing machine where mold can spread quickly. Make sure to hang them in an open & dry area for good air circulation. Also, don’t just let the walls or floor in wet condition after a thorough wash. Dry them instantly.

2. Control Mold Through Ventilation

A common misconception among household members regarding molds is that only carpets harbor them. But that’s not true at all. From the kitchen to your bathroom, molds can grow anywhere, especially where humidity is most likely to feel.

And to your relief, our experts suggest an easy solution for this. All you need is an Air-conditioning system (AC) or Dehumidifier to eliminate moisture. But even these appliances can, in turn, produce molds, so it is necessary to keep a check on them periodically and also clean them regularly.

3. Monitor Humidity For A Quick Action

We recommend purchasing a moisture meter from a nearby hardware store and measuring it. Usually, EPA recommends keeping indoor humidity between 40 and 60%.

It can also help you to detect high humidity by simply paying attention to potential problems in your home. With the help of a meter, you can take precautionary actions by drying the surface immediately or addressing the source of the moisture.

4. Arrange Indoor Plants

Indoor plants can be a great idea to deal with moisture and mold prevention. Some of the best plants that help absorb moisture are peace lilies, palms, spider plants, and Boston ferns.

Such plants are considered the best, especially in improving air circulation. However, it is essential to note that plants can also cause mold if proper care is not taken.

Therefore, be sure to water them regularly, provide them with good ventilation, and inspect them regularly.

5. Homage Solutions For Mold Prevention

Although we always suggest opting for professional mold remediation over DIY, some DIY solutions can help you get rid of mold. You can use baking soda, vinegar, bleach, and water to remove mold.

Add 1 cup bleach in 1 gallon water and pour on mold-affect areas. Wait for a couple of hours and rinse it with water. Then make a paste of vinegar and baking soda and scrub the surface with that paste. Again thoroughly rinse the areas and let it dry.

Always wear a mask, gloves, and protective goggles while treating mold.

6. Maintain The Cleanliness Of The Roof Gutter

When gutters are clogged with debris, such as leaves, dirt, and twigs, water cannot flow freely, which results in blockages. It causes water to pool around the gutters, which creates a breeding ground for molds.

Therefore, you must clean the roof, gutters, and other areas of your home regularly. Also, inspect the gutter for damage, and most importantly make sure they are properly pitched.

Summing Up

As mentioned earlier, mold can not only destroy your fabrics or walls and furniture but can also contribute to allergens and pollutants thereby affecting your health severely. By taking precautionary measures, you can safeguard your home as well as your family members.

Related Posts

Skip to content